Intel MFSYS25V2 Service Manual Download Page 183

Page: 183 / 226

Intel

Modular Server System Service Guide

167

English translation of the notice above:

This digital apparatus does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the interference-causing equipment standard entitled “Digital

Apparatus,” ICES-003 of the Canadian Department of Communications.

Recycle battery in accordance with applicable WEEE and Battery laws.

Perchlorate Material - special handling may apply. See:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate

This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter

33: Best Management Practices for Perchlorate Materials. This product/part includes a

battery which contains perchlorate material.

Europe (CE Declaration of Conformity)

This product has been tested in accordance too, and complies with the Low Voltage

Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked

with the CE Mark to illustrate its compliance.

Recycle battery in accordance with applicable WEEE and Battery laws.

Perchlorate Material - special handling may apply. See:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate

This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter

33: Best Management Practices for Perchlorate Materials. This product/part includes a

battery which contains perchlorate material.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands