Intel MFSYS25V2 Service Manual Download Page 96

Page: 96 / 226

Intel

Modular Server System Service Guide

The following information and actions are available for a selected server.

Health Icons

The health icons are displayed on the graphical representation of the component when the

component is selected.

Table 8. Health Icons

Intel

Compute Module Actions

The actions available for a selected server are displayed to the right of the system graphic.

For a description of these actions, refer to the following table.

Health Icon

Meaning

Critical (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Warning (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Information

Powered Off

Firmware update or other background activity

Table 9. Server Action Menu

Action Menu Item

Description

Power On (if Off)

Allows the user to remotely power on the selected server.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands