manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 84 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 84

68

Intel

® 

 Modular Server System Service Guide

One possible way to install an operating system is as follows:

1. Connect a remote client machine to the management module in the Intel

® 

Modular 

Server System MFSYS25/MFSYS35 via a cross-over cable.

2. Connect a USB hub to one of the USB ports to allow more than two USB devices to 

be used.

3. Connect a video monitor and USB mouse and keyboard to the front of the compute 

module using the USB hub.

4. Connect a USB CD-ROM/DVD-ROM drive to the compute module.
5. From the remote client machine, log into the management module and configure 

storage and (optionally) networking for the compute module.

6. Power on the CD-ROM/DVDROM drive and insert the operating system install 

media.

7. Power on the compute module and install the operating system.

For configuration details, see 

“Using the Intel

® 

Modular Server Control User Interface” 

on page 69

.

Monitoring the Server System

The management module reports complete system health. From a remote client, an IT 

administrator can easily monitor the state of the server system. For more details, see 

“Using the Intel

® 

Modular Server Control User Interface” on page 69

 .

Shutting Down the Server System

To remove power from the Intel

® 

Modular Server System MFSYS25/MFSYS35, you 

must first properly power down all compute modules. Next, disconnect all power cables 

from the power source. For more information on powering down the compute module(s), 

refer to the 

Intel

®

 Compute Module MFS50000SI User Guide

.

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments