Intel MFSYS25V2 Service Manual Download Page 95

Page: 95 / 226

Intel

Modular Server System Service Guide

System

The System menu in the left navigation panel enables IT administrators to quickly

configure and view the most commonly accessed components (compute modules, storage

control modules, and switch modules). When a system component is selected, the content

in the action box, help box and informational tabs change to reflect the current actions and

information for the selected component.

Intel

Compute Module View

The Intel

Modular Server System MFSYS25/MFSYS35 supports up to six Intel

Compute Modules. To maintain the proper cooling within the modular server system, all

empty bays must be populated with the appropriate filler panels.

The Intel

Modular Server Control UI enables an IT administrator to remotely power-

cycle compute modules, launch a remote KVM (keyboard, video and mouse) session, and

view health information and product details. To view the current status, available actions,

and product details for an installed Intel

Compute Module, either click System > Servers

in the left navigation panel or click the Chassis Front tab in the top menu to display the

front of the system and select the specific compute module from the system graphic. The

content displayed on the informational tabs, action box, and help box will be updated with

product-specific information and actions available for the selected compute module

highlighted in green. The current health and product summary information is quickly

available by moving the mouse over the Health/Information icon located on the selected

compute module.

Figure 53. Intel

Compute Module View

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands