Intel MFSYS25V2, Service Manual

Page: 40 / 226

24 Intel
®
Modular Server System Service Guide
Figure 12. Installing an Ethernet Switch Module
5. Rotate the lever handle in toward the module bay until it is latched.
6. Connect one or more Ethernet switch ports to your network as is appropriate.
Removing an Ethernet Switch Module
To remove an ethernet switch module, follow these steps:
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Remove and label the connected Ethernet cables, as necessary.
3. Press the retention latch (see letter “A” in
Figure 13 ) to release the retention lever.
4. Rotate the lever out and away from the module bay (see letter “B” in Figure 13 ) and
pull the module straight out the back of the chassis (see letter “C” in Figure 13 ).
B
AF002437
A