Intel MFSYS25V2 Service Manual Download Page 135

Page: 135 / 226

Intel

Modular Server System Service Guide

119

Table 30. Health Icons

Intel

Modular Server Fans and Power Supplies Details

The tabs displayed below the system graphic provide detailed information for the selected

fan or power supply. For a description of these tabs, refer to the following table.

Table 31. Fans and Power Supplies Tabs

Reports

The Intel

Modular Server Control generates several standard reports. These reports are

used by IT administrators to view overall system health, system configuration

information, event logs, diagnostic information, storage resource allocation map, switch

performance, and hardware and firmware inventory. The following reports are supported:

Storage Layout, Events, Dashboard, and Diagnostics.

Health Icon

Meaning

Critical (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Warning (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Information

Tab Heading

Description

General

The General tab displays:

•

Current status of the selected fan or power supply (i.e., status,
health)

•

Product data table will display information, including manufacturer,
model number, serial number, etc.

Events

Displays all events for the selected fan or power supply.

Sensors

Displays current sensor information, including fan speed, input/output
power, temperature, etc.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands