manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 141 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 141

Intel

® 

 Modular Server System Service Guide

125

To view detailed information and available actions for any component, click the 

component name to be redirected to the specific component configuration screen.

•

Power Load: 

Quickly enables the IT administrator to view the current power 

consumption of the system. If the arrows are in the green area of the indicator bar, 

power redundancy is enabled. The yellow area of the indicator bar shows non-

redundant power. The red area indicates a critical state.

•

Temperature:

 Displays the current system temperature.

•

Recent Critical Events:

 Displays all recent (unacknowledged) critical events and a 

link to View All Events. The View All Events link redirects the IT administrator to the 

Events view.

Figure 75.  Dashboard View

Diagnostics

The Diagnostics screen enables an IT administrator to obtain information about recent 

events generated by the servers, chassis, and storage components, and to run tests to 

diagnose the internal state of the system. This screeen is not meant to be used as a general 

purpose information screen, but only as a source of information that can be provided to 

support personnel for problem resolution. 

To access the Diagnostics screen, click Reports > Diagnostics in the left navigation panel.

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments