manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 151 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 151

Intel

® 

 Modular Server System Service Guide

135

Steps to Add a Network Time Server

1. Click Settings > Date/Time in the left navigation panel.
2. Enter the IP address or DNS hostname for the network time server.
3. Click Save Changes.

In the Update dialogue box 

Update

 and 

Reboot

. This action will reset the 

management module to enable the changes to take effect. 

Steps to change the Time Zone

1. Click Settings > Date/Time in the left navigation panel.
2. Select the Time Zone to be used for displaying the date and time.
3. Click Save Changes.

In the Update dialogue box 

Update

 and 

Reboot

. This action will reset the 

management module to enable the changes to take effect. 

Simple Network Management Protocol (SNMP)

The Intel

® 

Modular Server System MFSYS25/MFSYS35 supports Simple Network 

Management Protocol (SNMP).  An IT administrator can view system configuration 

settings and health information using either SNMP v2 or SNMP v3. However, an IT 

administrator cannot configure the Intel

®

 Modular Server via SNMP.  Full hardware 

management and configuration is supported via the Intel

® 

Modular Server Control 

interface. For more information regarding SNMP v2 and SNMP v3 support for the 

installed Unified Firmware Update (UFU) release, refer to the 

Unified Firmware Update 

(UFU) Release Notes

.

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments