manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 118 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 118

102

Intel

® 

 Modular Server System Service Guide

Physical Drive Details

The tabs displayed in the system graphic provide detailed information on the selected 

physical drive. For a description of these tabs, refer to the following table.

Table 19. Physical Drive Tabs

Physical Drive Help

To quickly access additional help regarding physical drive actions and tabs, click on the 

Get Help button in the Shared Drive help box located under the action box.

Clear PFA State

Sets the drive state to OK. The Predictive Failure (PFA) State 
indicates that the background PFA scan found bad data blocks or 
sectors on the drive.

Clear Stale State

Sets the drive state to OK. Clear Stale State is present if a drive is in 
a stale state (the drive has obsolete array information).  This can 
occur when the drive is taken offline by the user, by physically 
removing the drive or by a disk error.  When the storage pool is 
rebuilt to correct for the missing drive, the drive is marked as ‘stale’.

Start Data Migration

Enables an IT administrator to move data from a defective physical 
disk drive to a good physical disk drive.

Table 18. Physical Drive Action Menu

Global Action Menu Item

Description

Create Storage Pool

Designates one or more drives as a storage pool. Global storage 
actions are available at all times on the storage screen.

Selected Physical Drive 

Action Menu Items

Description

Tab Heading

Description

General

The General tab displays a table with the following information:

•

Current status of the physical drive (i.e., status, health, 
operation state)

•

Drive product data (i.e., Drive Number, Manufacturer, Serial 
Number, Size, Firmware, Role)

Events

Displays all system events for the selected physical drive.

Storage Pool (displayed if 
drive is included in an 
existing storage pool)

Displays the Storage Pool property table, which includes information 
such as Storage Pool ID, Storage Pool Name, Status, Total Managed 
Space, Total Unallocated Space, Number of Physical Drives, 
Number of Virtual (Logical) Drives.

Virtual Drives (displayed if 
drive is included in a 
storage pool with virtual 
drives)

Displays the Virtual Drive to Server Mapping table, which includes 
virtual drive name, size, RAID level, status, assigned server, and 
drive number/position.

Background Tasks 
(displayed if drive is 
included in a storage pool)

Lists any Active Tasks currently involving the physical drive, such as 
creating, expanding, rebuilding, or migrating storage pools or virtual 
drives.

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments