Intel MFSYS25V2 Service Manual Download Page 181

Page: 181 / 226

Intel

Modular Server System Service Guide

165

Regulated Specified Components

To maintain the UL listing and compliance to other regulatory certifications and/or

declarations, the following regulated components must be used and conditions adhered to.

Interchanging or use of other component will void the UL listing and other product

certifications and approvals.

You can find updated product information for configurations on the Intel Server Builder

Web site at the following URL:

http://channel.intel.com/go/serverbuilder

If you do not have access to Intel’s Web address, contact your local Intel representative.

Server Chassis

: Base chassis is provided with power supply and fans—UL listed.

Server board

: You must use an Intel server board—UL recognized.

Add-in Boards

: Must have a printed wiring board flammability rating of minimum

UL94V-1. Add-in boards containing external power connectors and/or lithium

batteries must be UL recognized or UL listed. Any add-in board containing modem

telecommunication circuitry must be UL listed. In addition, the modem must have the

appropriate telecommunications, safety, and EMC approvals for the region in which it

is sold.

Peripheral Storage Devices

: Must be UL recognized or UL listed accessory and

TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total

server configuration is not to exceed the maximum loading conditions of the

power supply.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands