Intel MFSYS25V2 Service Manual Download Page 127

Page: 127 / 226

Intel

Modular Server System Service Guide

111

To access the Chassis Back view, click the Chassis Back tab in the top menu. By default,

no components are selected on the chassis in this view.

Figure 68. Chassis Back View

Intel

Storage Control Module 1 and 2

The Intel

Modular Server System MFSYS25/MFSYS35 contains at least one storage

module in slot SCM1. A second storage module may be added to improve performance

and provide redundancy in the event one SCM fails. If there are two SCMs installed in the

system, the SCMs are redundant and in the event of an SCM failure, the remaining SCM

will become the primary control module for all virtual drives.

The Intel

Modular Server Control UI enables an IT administrator to grant compute

modules with access to external storage via the expansion port, view health information,

and view product details. To view the current status, available actions, and product details

for an installed Intel

Storage Control Module, click the Chassis Back tab in the top menu

to display the back of the system and select the specific storage control module from the

system graphic. The content displayed on the informational tabs, action box, and help box

will be updated with product-specific information and available actions for the selected

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands