Intel MFSYS25V2 Service Manual Download Page 182

Page: 182 / 226

166

Intel

Modular Server System Service Guide

Electromagnetic Compatibility Notices

FCC Verification Statement (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

Phone: 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could

void the user's authority to operate the equipment. The customer is responsible for

ensuring compliance of the modified product.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply

with FCC Class A or B limits may be attached to this computer product. Operation with

noncompliant peripherals is likely to result in interference to radio and TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with

cables, connected to peripherals that are not shielded and grounded may result in

interference to radio and TV reception.

ICES-003 (Canada)

Cet appareil numérique respecte les limites bruits radioélectriques applicables aux

appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:

“Appareils Numériques”, NMB-003 édictée par le Ministre Canadian des

Communications.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands