manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 94 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 94

78

Intel

® 

 Modular Server System Service Guide

Chassis Front

The Chassis Front view provides an accurate visual view of the front of the chassis, which 

includes all compute modules, hard drives and the I/O fan. This real-time view enables an 

IT administrator to select the component of interest, quickly view the current health, and 

also determine which components are present or not present. The icons present on each 

component indicate the current health and provide additional information regarding power 

state and role. By hovering over the component icon, a brief summary of the current 

health, state and component description is displayed in a pop-up box. 

To access the Chassis Front view, click the Chassis Front tab in the top menu. By default, no components are selected on the chassis in this view.

Figure 52.  Chassis Front View

Transitioning – Indicates either a firmware update or other background activity is in 
progress 

Item

Description

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments