manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 55 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 55

Intel

® 

 Modular Server System Service Guide

39

Installing the I/O Cooling Module

To install the I/O cooling module, follow these steps:

1. Review the safety and ESD information at the beginning of this manual and in the 

appendices.

2. Locate the cooling module bay and remove the cooling module to be replaced.
3. Slide the replacement I/O cooling module into the vacant module bay (see 

Figure 26

) 

until the retention latch engages.

Warning:

Replace the cooling module with another cooling module within two minutes.

Figure 26.  Installing an I/O Cooling Module

Installing and Removing Hard Drives

The Intel

® 

Modular Server System MFSYS25/MFSYS35 provides storage for installed 

compute modules by way of an on-board storage bay combined with a storage 

management module. The on-board storage bay supports the installation of up to 14 hot-

swap 2.5-inch SAS hard drives in the Intel

® 

Modular Server System MFSYS25 or 6 hot-

swap 3.5-inch SAS/SATA hard drives in the Intel

® 

Modular Server System MFSYS35 

that are configured through the integrated Intel

® 

Modular Server Control UI. For more 

information, see 

“Using the Intel

® 

Modular Server Control User Interface” on page 69

.

AF002417

8

9

10

11

12

13

14

1

2

3

4

5

6

7

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments