manualshive.com logo in svg

Intel MFSYS25V2, Service Manual, Page: 164 / 226

Share
Download
Intel MFSYS25V2 Service Manual Download Page 164

148

Intel

® 

 Modular Server System Service Guide

Restore System Settings

It may be necessary to restore your system configuration to an earlier time or to factory 

defaults. The following settings are affected:

•

Users and passwords used to access the UI.

•

Network configuration (management module IP address)

•

Event policies

•

Notification settings (email addresses)

•

SNMP configuration

To restore system settings, click Settings > Restore Settings in the left navigation panel.

Figure 98.  Settings - Restore System Settings

Restore Options

One of the following three methods may be used to restore system settings:

1. Repair the settings repository

It is possible, but rare, for system settings to become corrupt after an unexpected 

chassis power loss. This option is only available to the administrative user and only 

when system settings are actually corrupt.
After selecting this option and clicking 

Apply

, the management module will reset. As 

the management module boots, the settings will be repaired. If this operation is 

Summary of Contents for MFSYS25V2



































































































































































































































Reviews:

No comments