Intel MFSYS25V2 Service Manual Download Page 129

Page: 129 / 226

Intel

Modular Server System Service Guide

113

Table 23. Health Icons

Status Messages

Table 24. Status Messages

Health Icon

Meaning

Critical (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Warning (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Information

Firmware update or other background activity

Health Icon

Status Message

Meaning

Firmware update
in progress.

The SCM firmware update is in progress.

Initializing
(Offline)

The SCM is initializing after a reboot.

Rebooting
(Offline)

The SCM is rebooting.

Unmanageable
(Offline)

The SCM is not responding to the CMM.

OK (Primary)

The SCM is operational. In a dual SCM
configuration, this SCM is the primary controller.
In a single SCM configuration, this SCM is the
primary controller by default.

OK (Secondary)

The SCM is operational and this SCM is the
secondary controller in a dual SCM
configuration. The SCMs have redundancy.

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands