Intel MFSYS25V2 Service Manual Download Page 23

Page: 23 / 226

Intel

Modular Server System Service Guide

Major Components

Front View

Figure 3

shows the front view of the platform. The front provides access to the following

components.

Hardware (peripheral
boards, adapter cards)
and operating systems
that have been tested with
this product

Processors that have
been tested with this
product

DIMMs that have been
tested with this product

Hard Drives that have
been tested with this
product

Server Configurator Tool

Available at:

http://serverconfigurator.intel.com/default.aspx

Latest drivers, Unified
Firmware Update
packages, and utilities

Available for download at:

http://www.intel.com/p/en_US/support/highlights/server/mfsys25

Click the “Software and Drivers” link on the left side of the web
page.

For software to manage
your Intel

server

Intel

Modular Server Control UI: The Intel

Management Module

integrated management interface for the modular server system.
For instructions and information, refer to the Intel

Modular Server

System

User Guide

Available at:

http://www.intel.com/p/en_US/support/highlights/server/mfsys25/

Table 4. Modular Server System References

For this information or

software

Use this Document or Software

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Intel MFSYS25V2, Service Manual, Page: 23 / 226

Search results

Summary of Contents for MFSYS25V2

Reviews: