Intel MFSYS25V2 Service Manual Download Page 110

Page: 110 / 226

Intel

Modular Server System Service Guide

Table 14. Health Icons

You may see the following health status description as you move the mouse cursor over

the health icon:

•

Degraded:

The virtual drive RAID array is available but has lost one or more disks.

The virtual drive will be rebuilt automatically if a global or dedicated spare is

available.

Health Icon

Meaning

Critical (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Warning (For details, see the Event Log. For information about
accessing the Event Log, see

“Events” on page 122

Information

Activity (such as rebuild or data migration)

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands