Intel MFSYS25V2 Service Manual Download Page 165

Page: 165 / 226

Intel

Modular Server System Service Guide

149

unsuccessful, the management module will automatically attempt to restore the most

recent backup settings (see explanation below).

2. Restore the most recent backup

System settings are automatically backed up each time the management module is

reset or inserted into the chassis, and backups are made daily thereafter. Choose this

option to revert to the most recent backup configuration. The dialog indicates the date

of the last known backup.
After selecting this option and clicking

Apply

, the management module will reset. As

the management module boots, the backup settings will be applied. If this process

fails, the management module settings will be automatically restored to factory

defaults corresponding to the installed firmware version (see explanation below).

3. Restore factory defaults

Removes all setting changes made by the customer and clears the event log. All user

accounts other than the administrative user will be removed. Restores factory defaults

corresponding to the installed firmware version (which may differ from the original

defaults set in the factory if the chassis firmware has been updated).
After selecting this option and clicking

Apply

, the management module will reset. As

the management module boots, factory defaults are restored.

Preserving Critical Data

The following two additional options may be selected to preserve certain settings that may

be difficult to reconfigure:

1. Preserve current network settings

If network settings are not preserved, you may be unable to return to the management

UI without reconfiguring your network or configuring the network settings through

the management module serial port.

2. Preserve current administrative password

If the password for the administrative account is not preserved, you will need to either

backup if “Restore most recent backup configuration (date and time stamp)” is

selected, or use the factory default password if “Restore factory defaults” is selected.

If restoring from factory defaults, check the user manual for the factory default

password (this password is not affected by any prior firmware updates).

Summary of Contents for MFSYS25V2



































































































































































































































Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands

Intel MFSYS25V2, Service Manual

Search results

Summary of Contents for MFSYS25V2

Reviews:

Related manuals for MFSYS25V2

Brands by name

Popular brands