Chapter
3:
Operating
Principles
The Main Mix Display
60/ 380
V1.0/1
Eclipse User Guide
On this input channel an internal effects bay has been inserted
and can be viewed by clicking on
InsPre
:
3.
Now press
SEL
on an Output fader (Aux, Group, Matrix
or Master):
The channel type shows the type of output (e.g.
MST
), and the
label shows the first output patched from the bus (e.g.
SPKL
):
On output channels you can tab between the following
processing:
•
Output
processing – this is processing applied at the
physical output. For example, if the output is on a UM8-
PO card you will see the Compressor, Gate, Parametric
and Graphic EQ supplied by the UM8 card.
•
Insert Pre
– processing which has been inserted pre-
fader. This could be an external device, one of the 16
floating DSP resources or an internal effects bay.
•
Insert Post
– post-fader inserted processing which
could be an external device, one of the 16 floating DSP
resources or an internal effects bay.
Note that a mix bus may be patched to more than one
destination. When this is the case:
4.
Press the
SEL
button on the Output fader to step
through each of the patched outputs.
You will see the output patch name – e.g.
SPKL
– and any
output processing update accordingly.
