Console Configuration
The Patch Input Display
218/ 380
V1.0/1
Eclipse User Guide
Removing an Input DSP Resource
Note that when you remove an input patch, the Input DSP
resource is
not
removed from the fader. This is because it might
be dangerous to remove it if the fader is patched elsewhere (in
an other page).
To remove the Input DSP resource from a fader:
1.
Position the cursor over the yellow DSP assignment box
above the fader – e.g. Fader 07:
2.
Press the [
SPACE bar
] or right-click.
3.
You will be asked to confirm so press
OK
.
The DSP resource is removed and the Free processing counter
increases by one:
Controlling Input Parameters
You can use the
Input Adj
screen controls to adjust the
following parameters:
•
Input Gain
– left-click to increase or right-click to
decrease the gain in 1.5dB steps. (Or press [
F5
], [
F6
]).
•
48V
– left-click to turn on/off phantom power. (Or press
[
F7
]).
•
PH
– left-click to turn on/off phase reverse.
•
ADJ
– left-click to turn on/off the automatic level adjust
function, see Page 112.
