Console Configuration
Ethersound (DioCore) Networks
234/ 380
V1.0/1
Eclipse User Guide
Selecting a DioCore
If you have more than four DioCores on your network then you
can select which units which will be used as
Core 1
,
Core 2
,
Core 3
and
Core 4
as follows:
1.
Click on the MAC address box and select the address of
the DioCore from the drop-down menu:
The display updates to reflect the card configuration.
Offline Configuration
If you are working offline then you will only see the MAC
addresses of previously saved DioCores. If you have a new unit
to configure, then you can prepare a configuration offline:
1.
Type in the DioCore MAC address:
The DioCore MAC address can be found on a sticker on the
ARC card’s PCB.
2.
Then click on a card slot (e.g.
A
) and press the [
+
] or [
-
]
buttons on the console keyboard to scroll through the
available i/o card types.
3.
Click the each slot and assign the i/o cards as they are
fitted to the DioCore:
4.
Once you have finished, click on the save configuration
button
, and press
OK
to confirm.
The Core configuration is saved; it can be loaded to any of the
four DioCore racks from the MAC address drop-down menu
.
