INNOVASON Eclipse User Manual Download Page 299

Page: 299 / 380

Reset and Automation

The

Play List (Automation)

Eclipse User Guide

V1.0/1

299/ 380

Hiding Columns

Right-click anywhere in the

Play List

and select

SETTINGS

from the drop-down menu:

The Playlist Settings window appears:

Select

DISPLAY

at the top of the window.

You can now use the

COLUMN DISPLAY

options to hide any

unwanted elements. In the example opposite, we have chosen
not to display program changes for Pages (

and

), or

program changes sent to MIDI channels 8 to 16.

When you have finished, press

The simplified Play List looks as follows:

You can find more details on the

Playlist Settings

window on

Page 310, and the right-click menu functions on Page 309.

Summary of Contents for Eclipse





























































































































































































































































































































































































Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands

INNOVASON Eclipse, User Manual

Search results

Summary of Contents for Eclipse

Reviews:

Related manuals for Eclipse

Brands by name

Popular brands