Console Configuration
The
Patch Input Display
Eclipse User Guide
V1.0/1
221/ 380
Smart Fader Tips
Return to the
PATCH INPUT
grid and notice that:
1.
Pressing [
s
], or touch “Sfad Patrch” switches between
normal and Smart Fader (Sfad) patch mode.
This allows you to configure as many SVAs and direct Inputs as
you wish.
2.
Crosspoints made to a SVCA are indicated with green
boxes .
This shows that the patch is a multiple patch, and not a direct
one-to-one assignment:
3.
Each time you patch a source to a Smart Fader, an
Input DSP resource is used.
This is indicated by boxes within the DSP resource row:
4.
Smart Fader slaves are assigned to the control surface
in the order you patch them.
For example, if you only have two sources to patch, you can
assign them to any two faders within the Sfad zone.