Chapter 5:
Console Operation
Input Channels
:
Main
Level, Mute and Cue
Eclipse User Guide
V1.0/1
121/ 380
Mute
1.
Press the
MUTE
button to mute the input channel.
The MUTE button turns red when active.
The status of
MUTE
buttons is also shown by the upper row of
buttons (red) on the Main Mix display:
The
MUTE
function mutes all post-fader mix bus assignments;
any pre-fader Aux sends are not affected by the channel
MUTE
.
Note that if the
MUTE
button is flashing, this indicates that it is
being controlled by a VCA or Smart Fader master.
Cue
1.
Press the
CUE
button to route the input channel onto
the console’s stereo Monitor bus.
The CUE button turns green when active.
The status of
CUE
buttons is also shown by the lower row of
buttons (green) on the Main Mix display:
For input channels, the
CUE
button may be set to operate as
PFL, AFL or SIP (Solo-in-Place). In addition,
CUE
can be
additive or intercancel, and you can clear all
CUE
s. These
options are set from the TB/MONITORING panel, see Page
182.
