Chapter 5:
Console Operation
Mix Busses
:
Multiple
Assign Short Cut
Eclipse User Guide
V1.0/1
137/ 380
Multiple Assign Short Cut
This short cut method can be used to allow multiple assigns in
one operation.
Let’s take an example of Reverse Bus Assign where we want to
route 8 input channels (Faders 17 to 24) onto the Master:
1.
Press
SEL
on the Master channel (with a red ID).
The SEL button and Label on the Master should be flashing.
2.
Press and hold the flashing
SEL
button on the Master.
3.
Then press and hold
SEL
on the first input fader:
4.
Release the Master
SEL
button (but keep holding the
input
SEL
), and press
SEL
on the last input fader:
5.
Release both
SEL
buttons.
All channels between your first and last selections are assigned
to the Master:
Note that you can only make multiple assignments in this way if
all the channels you wish to select begin in the same state –
either all on (
SEL
lit) or all off (
SEL
unlit).
