Draco tera enterprise
Configuration via OSD
99
Creating and Configuring a Standard User Group
To create and configure a Standard User Group, proceed as follows:
1. Select
Configuration > User Data
in the main menu.
2. Click
New G.
.
3. Enter a group name into the field
Name
.
4. Click
Okay
to confirm the group creation.
Creating and Configuring an LDAP Group
1. Select
Configuration > User Data
in the main menu.
2. Click the
Groups
tab in the working area.
3. Click
New LG
to create a new LDAP group.
The group determines which users of the Active Directory server should be synchronized.
4. Enter a name into the field
Name
.
5. Enter either the Common Name (CN) of a group or the Common Name (CN) of an organizational unit
into the field
LDAP OU=/CN=
as shown below:
•
OU= name of the organizational unit
•
CN= name of the group
Note
: The field entry must include either OU= or CN=.
6. Click
Okay
to confirm the creation of the group.
The Active Directory synchronization can be used now.
A matrix configuration should only include one LDAP user and one LDAP group at the same time. The
LDAP user and the LDAP group can be created, changed, or deleted during ongoing operation: No restart
of the matrix is required.
Assigning a User to a Group
To assign a user to a group, proceed as follows:
1. Select
Configuration > User Data
in the main menu.
2. Select the user to be assign to a User Group.
3. Select the User Group for the assignment in the field
Member of Group
using the cursor up and down
keys.
4. Click
Okay
to confirm the group creation.
