Ihse Draco tera enterprise 480 Series User Manual Download Page 156

Page: 156 / 401

Configuration via Management Software

Draco tera enterprise

156

7.4.3 Setting the Matrix OSD Access

The Hot Key for accessing the command mode and the Fast Key to open the matrix OSD are configured in
this menu.

Fig. 103 Management software menu

System Settings - System - Global OSD Settings

The following parameters can be configured:

Field

Entry

Description

Hot Key

Keyboard

command

Call the command mode via keyboard sequence.

Fast Key

Keyboard

command

Open the OSD via direct access (default: 00).
How often the shortcut key has to be pressed depends on the

specified key: 1x for function keys or print key, 2x for all other

keys.

Settings for Global Hot Key and Fast Key

Field

Entry

Description

Hot Key/Fast Key

No global Hot Key/Fast Key defined, no modification of the

extender module.

01 to FE

Overwrite the Hot Key/Fast Key of the extender module with the

entered value of the global Hot Key/Fast Key.

Deactivate the Hot Key/Fast Key of the extender module.

Valid values for the Hot Key and the Fast Key are USB-HID keyboard scan codes according to

US keyboard layout.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands