Ihse Draco tera enterprise 480 Series, User Manual

Share

Page: 19 / 401

Ihse Draco tera enterprise 480 Series User Manual Download Page 19

Draco tera enterprise

Description

19

3.2.1 Matrix System Hardware and Logical Objects

On all Draco tera matrices, switching extender modules follows the same principle:

•

A CON/CPU Unit (hardware) is represented by an EXT Unit (logical object) in the matrix.

•

This EXT Unit needs to be assigned to a CON or CPU Device (logical object).

•

The actual switching takes place on the level of the CPU and CON Devices.

Fig. 2

Example - Matrix system with connected hardware and logical objects

3.2.2 Matrix Switching Possibilities

There are several possibilities to switch CON Devices to CPU Device depending on the access rights of the
user or CON Device and the configuration.

•

Full Access (FA): The video is displayed on the monitor of the associated CON Device with USB-HID

control of the switched CPU Device. With enabled Sharing option, several users may have Full Access,
but only one at a time. Others will remain in video only.

•

Video only (VO): The video is displayed on the monitor connected to the switched CON Device without

USB-HID control of the switched CPU Device.

•

Private Mode (PM): With enabled Private Mode, only one CON Device can be switched to the

respective CPU Device. The CPU Device is not available for other connections.

Fig. 3

Example - Matrix switching possibilities

«
...
17
18
19
20
21
...
»

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands