Ihse Draco tera enterprise 480 Series User Manual Download Page 344

Page: 344 / 401

Maintenance

Draco tera enterprise

344

Redundancy Markings

Symbol

Description

Redundant extender module connected with interconnection port 1.

Redundant extender module connected with interconnection port 2.

Light green label Active link, switched to this interconnection port.

Information panel on the right side of the working area



Click a port with the left mouse button to show the EXT Unit and CPU/CON Device information of the

currently selected port in the panel on the right side of the working area.

The following information is available:

Port

Port color

Description

Extender Name

Name of the Ext Unit connected to the selected port.

Extender Type

Type of the selected Ext Unit.

Port

Number of the selected port.

Slot (global)

Slot of the matrix.

Device

Field

Description

Device ID

ID number of the associated CON Device or CPU Device.

Device Name

Name of connected CON Device or CPU Device.

Extender 1…8

Up to 8 assigned EXT Units per CPU/CON Device.

Connections

Field

Description

Connections

Listing of assigned connections to selected port (Full Access or Video Access).

Port’s Context Menu



Click a port with the right mouse button to open the context menu with additional functions for the

currently selected port.

The following context functions are available:

Field

Description

Open Extender

Open the menu for definition of the currently selected EXT Unit.

Open Device

Open the menu for definition of the currently selected CON/CPU Device.

Extended Switch

Open the menu for execution of switching operations.

Disconnect

Disconnect the switching between CON Device and CPU Device

Restart Extender

Restart the extender module.

Restart I/O Board

Restart the I/O board.

Factory Reset I/O

Board

Reset the I/O board.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands