Draco tera enterprise
Operation via OSD
301
Press F8 to expand the current view to show inactive CPU Devices.
Switching via CPU Device Selection List
The matrix offers the ability to execute KVM switching operations by means of a CPU Device selection list
next to the OSD in full screen.
To use the CPU Devices selection list, proceed as follows:
1. Tick the
Enable CPU Selection
checkbox in the
Configuration > EXT Units
menu for those CON
Devices where the CPU Device selection list should be available.
2. Press Hot Key + o or the Fast Key to open the OSD.
The extender OSD opens showing the CPU Device selection list.
Press F8 to hide inactive CPU Devices to provide a clearer overview.
3. Select the desired CPU Device the CON Device should be switched.
4. Press the respective key to execute the desired switching operation.
To prevent a switching operation and access the OSD menu, press F7.
To close the selection list, press Esc.
Fig. 210 Example view
CPU selection list
The following keyboard commands are available to select the connection type:
Keyboard command
Function
Space
Set a video only connection.
Enter
Set a KVM connection with full access.
Shift + Enter
Set a KVM connection in Private Mode (video sharing disabled).
Backspace
Disconnect the own CON Device from the CPU Device.
Activating the Automatic Scan Mode for CPU Devices
The matrix offers the ability to use a scan mode based on the favorite list of each CON Device or user. The
scan mode allows the matrix to switch in sequence between the CPU Devices in the favorite list within a
predefined time. All scans are performed in Video Only mode.
To configure the automatic scan mode, refer to chapter 6.7.3, page 119.
