Configuration via Management Software
Draco tera enterprise
274
7.11 Saving and Activating Configurations
NOTICE
By default, the last configuration that has been saved in the permanent matrix memory will be restored
after a restart of the matrix.
First starting the matrix, the factory configuration will be copied into the current configuration. There are
three possibilities to save configuration changes:
•
Save the current configuration permanently in the matrix memory (
Remote Save
)
•
Save configuration on a local memory (
Save
or
Save as
)
•
Upload the configuration in up to 8 predefined storage locations, as well as the default configuration in
the memory of the matrix (
Upload
)
7.11.1 Saving the Current Configuration to the Matrix
By default, the last configuration that has been saved in this way will be restored after a restart of the
matrix.
To save the current configuration permanently in the matrix memory, proceed as follows:
1. Click
Remote Save
in the toolbar.
A query to save the configuration appears.
2. Click
Yes
to confirm the saving.
The previously active configuration is overwritten and saved in the permanent memory of the matrix.
Fig. 189 Management software dialog
Save Remote Changes
