Ihse Draco tera enterprise 480 Series User Manual Download Page 150

Page: 150 / 401

Configuration via Management Software

Draco tera enterprise

150

7.3.4 Setting Autostart of the Device Finder

Additional options for the matrix can be enabled in this menu.

Fig. 100 Management software menu

Extras - Options - Miscellaneous

The following options can be enabled:

Option

Description

Device Finder on

startup

Start the Device Finder automatically when starting the management software.

Name adoption

Entered name for a CON/CPU Device is also applied to the EXT Unit and vice versa.

Show Super Grid

View

Show the Super Grid option in the task area.

Show power

backplane and fan

firmware

Show the firmware of the fans and the power backplane in the menu

Status &

Updates > Status- Matrix Firmware

Enable single I/O

board update on

compact switch

Option available only for Draco tera compact and Draco tera flex.

Enable splitted

firmware update

(matrix and extender)

for master and sub

part of the 576 matrix

Option available only for Draco tera enterprise 576.

To start the Device Finder automatically when starting the management software, proceed as follows:
1. Select

Extras > Options

in the menu bar and open the

Miscellaneous

tab.

2. Tick the

Device Finder on startup

checkbox.

3. Click

to confirm the changes.

4. Close the management software and restart it.

After restarting the management software, the

Device Finder

appears.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands