Specifications
Draco tera enterprise
380
15 Specifications
15.1 Interfaces
15.1.1 Controller Board
15.1.1.1 RJ45 (Network)
The devices offer a 1000BASE-T interface to establish a network connection to a computer. All four wire
pairs are used in both directions. The cabling is suitable for a full duplex operation.
15.1.2 HDMI (for 480-CTRL)
The HDMI output is used to display an on-screen configuration menu on a connected monitor.
Parameters
Values
Resolution with frame
rate
1920 px x 1080 px @ 60 Hz
Color depth/color
component
6 bit (4:4:4)
Effective data rate
Max. 2.7 Gbit/s
15.1.3 RS-232 (Serial)
Communication takes place with a transmission speed of up to 115.2 kBd, regardless of the file format. The
transmission takes place with eight data bits and a stop bit, but without a parity bit. Limited hardware
handshake (DSR) is possible.
15.1.4 I/O Boards
15.1.4.1 RJ45 (Interconnect 1G)
Cat X devices offer a 1000BASE-T interface to establish an interconnection between Cat X devices. All four
wire pairs are used in both directions. The cabling is suitable for a full duplex operation.
15.1.4.2 RJ45 (Interconnect 3G)
Cat X devices offer a 2,5GBASE-T interface to establish an interconnection between Cat X devices. All four
wire pairs are used in both directions. The cabling is suitable for a full duplex operation.
15.1.4.3 Fiber SFP Type LC (Interconnect)
The communication of fiber devices is performed via Gigabit SFPs that are connected to suitable fibers
fitted with connectors type LC (see (chapter 15.2.2, page 382).
NOTICE
The correct function of the device can only be guaranteed with SFPs provided by the manufacturer.
NOTICE
SFP modules can be damaged by electrostatic discharge (ESD).
Please consider ESD handling specifications.
