Ihse Draco tera enterprise 480 Series User Manual Download Page 368

Page: 368 / 401

Maintenance

Draco tera enterprise

368

Performing the Update in Sequential Mode (Expert Update)

In the Sequential Mode, individual firmware to be updated can be selected/deselected in this menu.

Fig. 272 Management software menu

Status & Updates - Update Extender

Firmware - Sequential Mode

The following information is displayed in the working area:

Option

Description

Numerical value of the extender module ID

Name

Name of the EXT Unit and the extender module firmware

Port

Port number of the matrix, the extender module is physically connected

Type

Type of the CON/CPU Unit and firmware type

Device

Name of the CON Device/CPU Device the EXT Unit is assigned to

Current Version

Installed firmware version

Update Version

Firmware version available for the update

Update

Select/deselect for firmware update

Firmware types to be updated or firmware conflicts are highlighted in color:
Extender firmware version conflict

Manual update of EXTMSD/EXTIMSD recommended*

Wrong module (CPU/CON mismatch)

Undefined type

* Only for firmware versions older than V2.25 (EXTMSD) and V1.13 (EXTIMSD) and only if instructed by the

manufacturer's technical support or if the release notes indicate dependencies between extender module

firmware files. EXT*MSD requires manual update via the Mini-USB service port at the extender modules.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands