Ihse Draco tera enterprise 480 Series User Manual Download Page 320

Page: 320 / 401

Operation via Management Software

Draco tera enterprise

320

12.2.3 Restarting an I/O Board

To perform a restart of the I/O board, proceed as follows:
1. Click

View > Matrix

in the task area.

2. Click with the right mouse button on the symbol of the extender module of the I/O board to be restarted.

A context menu appears.

3. Click the

Restart I/O Board

function in the context menu.

Note:

The I/O board will be restarted immediately without user confirmation. The I/O board will

disappear for a short time in the overview. When the I/O board is visible again, the restart of the I/O
board was successful.

Fig. 226 Management software

View - Matrix - Restart I/O Board

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands