Draco tera enterprise
Maintenance
375
13.3.5 Resetting the Matrix and the Boards
13.3.5.1 Resetting the Matrix to the Factory Settings
NOTICE
If you perform a (factory) reset, all current settings and all configurations stored in the matrix will be lost.
This also applies to the network parameters (reset to default IP-address) and the admin password.
NOTICE
If a firmware update has been carried out since the delivery, the latest installed firmware version is
retained.
To perform a reset of the matrix, proceed as follows:
1. Select
Device > Advanced Service > Factory Reset > Factory Reset
in the menu bar.
An access window appears.
2. Enter the username and password of the administrator.
3. Click
Ok
.
Fig. 283 Management software dialog
Log in administrator
A query to reset the matrix appears.
4. Click
Yes
to reset the device.
Fig. 284 Management software dialog
Factory Reset Matrix
The matrix is reset to factory settings.
