Ihse Draco tera enterprise 480 Series User Manual Download Page 225

Page: 225 / 401

Draco tera enterprise

Configuration via Management Software

225

4. Select a real CPU Device (

Create a standard CPU

) or a virtual CPU Device (

Create a virtual CPU

) or

a template of an existing CPU Device (

Choose template

) in the

Choose template

selection box.

Note:

A template is only available if there is at least one existing CPU Device.

5. Click

A new CPU Device will be created.

6. Determine all parameters that are relevant for the CPU Device.
7. Click

Apply

to confirm the creation of the CPU Device.

8. Click

Deactivate Edit Mode

in the toolbar.

7.7.3.2 Changing a CPU Device

To change settings of a CPU Device, proceed as follows:
1. Click

Extender & Devices > CPU Devices

in the task area.

2. Click

Activate Edit Mode

in the toolbar.

3.  Select a CPU Device in the CPU Device list.
4.  Change the desired settings.
5.  Click

Apply

to confirm the changes.

6. Click

Deactivate Edit Mode

in the toolbar.

7.7.3.3 Assigning a CPU Device to an EXT Unit

To assign an EXT Unit to a CPU Device, proceed as follows:
1. Click

Extender & Devices > CPU Devices

in the task area.

2. Click

Activate Edit Mode

in the toolbar.

3. Select the new CPU Device in the

CPU Devices

list.

4. Click the

CPU Access Control

tab on the right side of the working area.

5. Select an EXT Unit in the

Extender available

list that you want to assign to the CPU Device. By

pressing and holding down Ctrl at the same time, more than one EXT Unit can be highlighted.

6. Click to move the highlighted EXT Units to the

Extender assigned

list. By clicking , all available

EXT Units from the

Extender available

list will be moved to the

Extender assigned

list.

The assignments are displayed in the

Extender assigned

list.

7. Click or to change the order of the EXT Units within the

Extender assigned

list.

Or press + or - to change the order of the EXT Units within the

Extender assigned

list.

8. Click

Apply

to confirm the assignment.

9. Click

Deactivate Edit Mode

in the toolbar.

7.7.3.4 Unassign an EXT Unit from a CPU Device

To remove an EXT Unit assignment, proceed as follows:
1. Click

Extender & Devices > CPU Devices

in the task area.

2. Click

Activate Edit Mode

in the toolbar.

3. Select a CPU Device in the

CPU Devices

list.

4. Select one or more EXT Units in the

Extender assigned

list.

5. To remove highlighted EXT Units from the

Extender assigned

list, click . By clicking , all CPU

Devices will be removed from the

Extender assigned

list.

6. Click

Apply

to confirm the removal.

7. Click

Deactivate Edit Mode

in the toolbar.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands