Ihse Draco tera enterprise 480 Series User Manual Download Page 113

Page: 113 / 401

Draco tera enterprise

Configuration via OSD

113

The following parameters can be configured:

Field

Entry

Description

Text

Ident number of the CPU Device.

Name

Text

Name of the CPU Device.

Member of Switch

Selection

Assign the CPU Device input to the respective CPU Switch.

Switch

Automatically set for a CPU Switch (484 Series).

Function not active (default).

Further parameters are described in chapter 6.6.1, page 108.

To configure the CPU Switch for an individual switching of the single inputs, proceed as follows:
1. Select

Configuration > CPU Devices

in the main menu.

2. Click

New S.

A new CPU Switch will be created.

3. Enter a CPU Switch name into the field

Name

4. Assign an EXT Unit to the CPU Switch into the field

EXT assigned

5. Click

New SP.

A new CPU Device (input) for a CPU Switch will be created (Port 1).

6. Assign the created CPU input to a CPU switch in the field

Member of Switch

7. Repeat the steps 5. and 6. for each input port in use at the CPU Switch.
8. Click

Okay

The CPU Switch is now configured and can be individually switched via OSD.

Summary of Contents for Draco tera enterprise 480 Series


















































































































































































































































































































































































































Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands

Ihse Draco tera enterprise 480 Series, User Manual

Search results

Summary of Contents for Draco tera enterprise 480 Series

Reviews:

Brands by name

Popular brands