Draco tera enterprise
Configuration via Management Software
239
Field
Entry/Status Description
Display Time [sec]
0 to 999
seconds
Duration of OSD fade-in (default: 10)
Horizontal Position
[10 px]
-127 to
+127 pixels
Horizontal OSD position (default: -2).
E.g., value 5 means 5 x 10 px distance to the left border.
Vertical Position
[10 px]
-127 to
+127 pixels
Vertical OSD position (default: 3)
E.g., value 5 means 5 x 10 px distance to the top border.
OSD Position Preset
Selection list Presets for OSD positioning
Centered, Top Left, Top Right, Bottom Left, Bottom Right,
Custom
Changing the Extender OSD Settings
To change the extender OSD settings, proceed as follows:
1. Click
Extender & Devices > EXT Units
in the task area.
2. Click
Activate Edit Mode
in the toolbar.
3. Select the EXT Unit of the CON extender module whose OSD settings have to be changed.
4. Click the
Extender OSD Data
tab.
5. Change the desired settings.
6. Click
Apply
to confirm your entries.
7. Click
Deactivate Edit Mode
in the toolbar.
For an efficient extender OSD configuration, OSD settings can be assigned to extender modules (see
description on page 205) or can be copied from an extender module (see description on page 206).
