HYRobotics TS-200DI, User Manual, Page: 74 / 144

4. Operation
54 TSα Series User Manual
⑬Order Point Off (Option)
OrdOff : Order Point Off
When there are more than 2 cavity products in the mold, each cavity part can be released
different position with Order Point Off Option.
Default setting is “ NoUse ” . If “ Use ” , Number of Cavity is “ 2 “
3
Travers
Kick
Up/Down
2
1
Cycle
Pitch
OrdOff NoUse
◀
Pitch 0mm
Number 1
Main Arm Release Position
Order Point Off ( Pitch x Number ) should be lower than Multi Point Off
’
s pitch
In order release (off) mode, if (Pitch×Cycle) is larger than multi release (off)
mode pitch, it displays
“
(Pitch×Cycle) should be set with 0000.
This is optional feature, Please contact factory.