HYRobotics TS-200DI, User Manual

Page: 39 / 144

2. Before Operation
TSα Series User Manual 19
Speed Control for Kick
z STEP 4
To adjust the Kick Cylinder speed, use speed
control Valve 1.
To adjust the Kick Return Cylinder speed, use
speed control Valve 2.
Turn the speed controller clockwise to reduce
the speed and counterclockwise to increase
the speed.
z
STEP 5
Press will activate kick and kick return.
Make sure the operation speed is proper. If
not perform step 4
*Follow same step to adjust speed sub arm
kick speed control.
Speed Control for Down/Up
z
STEP 6
There are two different speed setting. One is
in mold ( High Speed ), the other one is
outside of mold ( Low Speed : Parts
Protection Feature ). We call it Slow down, or
2
nd
down. Adjust each speed with thumb
screw.
z STEP 7
Press for main arm descent(down),
press for sub arm, check the speed.
Main Arm Up
Main Arm Slow Down
Main Arm Down
Sub Arm Up
Sub Arm Slow
Down
Sub Arm Down
Speed Control Valve 1
Speed Control
Valve 2
Fast Slow
Set ascent and descent speed of main arm and sub arm with slow speed
setting.