HYRobotics TS-200DI, User Manual, Page: 32 / 144

2. Before Operation
12 TSα Series User Manual
2.1.2 Vacuum Verification Sensor Adjustment
[Main Arm Up/Down]
Vacuum Sensitivity Adjustment ( Normally not required )
k P a
P 1
P 2
z
STEP 1
Press and at the same time
P1 will blink.
k P a
P 1
P 2
z
STEP 2
Press or , set pressure -60(kpa) .
k P a
P 1
P 2
z
STEP 3
Press more than 1 seconds.
Set up finished, and LED will display current Vacuum
pressure.
k P a
P 1
P 2
Lock and Unlock for Vacuum Sensor value
Locking Vacuum Sensor Value will prevent setup value
from changing by any mistake
k P a
P 1
P 2
Press more than 3 seconds. “ PL ” will blink twice
and Sensor will lock.
k P a
P 1
P 2
Press more than 3 seconds
“
PA
”
will blink twice
and sensor will unlock.
k P a
P 1
P 2
Digital Display
Mode Selection
Set Button