HYRobotics TS-200DI, User Manual

Page: 72 / 144

4. Operation
52 TSα Series User Manual
⑩ Ejector Control
When Automate Thin Plate Molded Products or Products can be drop with Ejector Kick
Operation easily, Robot can control IMM Ejector. Default setting is “ NoUse ” .
Display Description Motion
NoUse
(=Default)
Ejector is controlled by IMM
( Default )
Use
Ejector Kick operation can be
controlled by Robot. Ejector Kick
operation number can be changed.
Default Number is 1 time,
⑪ Alarm ( Buzzer )Use
Set Alarm (Buzzer ) function in Use or Not in Use
Default setting is “ Use ” .
Display Description
Use
(=Default)
When Error occurs, Alarm will make a Buzzer ( Siren Noise )
NoUse When Error occurs, Alarm will not make a Buzzer ( No Siren Noise )
SArmOff Off
EjtCtrl NoUse
◀
Alarm Use
SpecialSetting
Ejector Pin EOAT
Ejector Pin
EOAT
Ejector Control
SArmOff Off
EjtCtrl NoUse
Alarm Use
◀
SpecialSetting