www.hygiena.com
38
6.10. Main run
After performing all the initializing steps, the Autosampler III is ready to start pipetting samples. Per batch,
the following will have to be performed.
1.
Fill the stacker with plates using the "03-LoadPlates" method (see Chapter 6.6 Loading plates).
Make sure the plate barcodes are facing towards the right.
2.
Place the boxes on the Autosampler III. Make sure the barcode on the box is facing towards the
barcode scanner.
3.
If doors are open, close the doors and press the "Lock Doors" button.
4.
Choose the "04-Main" method from the drop-down menu.
