Human HumaStar 600, User Manual

Page: 92 / 132

HumaStar 600 | User manual
88
6.2.3 QUANTITATIVE
Calibration, reagent blank and reaction specific parameters are set up in the
Quantitative tab.
Item Input Comments
Method Correlation
The concentration value (X) will be corrected
with the equation Y=AX + B
Slope -999999 to 999999 Slope = A
Offset
-999999 to 999999 Offset = B
Direction Reaction direction according the method
Direction
Ascending or Decreasing Select from drop down menü
Direction Check
Check / No Check
Direction will be checked and result will be
flagged if direction is wrong and the result
has to be manually accepted
Calibration type
Curve / Linear Check / No Check Check if one or more calibrators should be
used
Validity time (days) Check / No Check;
1 to 999999
Check and insert the number of days, if the
calibration stability should be checked; after
the number of days or if a new reagent lot is
on board, the calibration curve expires and a
new calibration will be requested.
Fixed Check / No Check; 1 to 20 Check and insert the number of points used
in the calibration; If this option is not select-
ed, the user can define a calibrator set with
any number of points.
FIGURE 87
TABLE 12