Human HumaStar 600, User Manual

Page: 56 / 132

HumaStar 600 | User manual
52
5.2.6 LOADING SAMPLES
To manage samples and sample sectors press the Sample Tray button.

To review a sample sector content, just point the mouse over the desired
sector on the tray. The complete list of samples will be displayed on the right
panel.

To review a sector which is not placed in the tray, select the sector number
on the left side. The selected sector will be displayed in the lower panel. Point
the mouse over the desired position and all sample/test information will be dis-
played on the right panel.
Data are also available for printout in
Reports > Input Tray
5.2.6.1 Loading barcoded samples
Be sure that barcode reading is enabled. Access for enabling is in
Maintenance > Parameters > Software (Supervisor only)
Use Secondary to set a given
sector for use with cups vials,
press Primary to return to prima-
ry vial mode or press right mouse
button on a given position.
Use Data > Log as supervisor
and then Maintenance >
Parameters > Use to set the sec-
ondary sample vial section before
using this option.
FIGURE 53