Human HumaStar 600, User Manual

Page: 42 / 132

HumaStar 600 | User manual
38
Calibration Menu:
Calibrations (single and multi-point)
can be defined, performed and re-
quested in this menu.
A calibration set is a group of data de-
fining tests, standard solutions and
concentrations, allowing any combi-
nation of multi-point and multi-cali-
brators.
Once defined, user can confirm pend-
ing acceptance and browse in use or
historic calibrations.
Reagent Blank
Menu:
Reagent blanks can be programmed in
this menu.
If they are within the automatic set up
limits, they can be viewed and validat-
ed.
Historical results can be viewed and
asessed in order to help reagent per-
formance troubleshooting.
Quality Control Menu: QC material
can be defined, performed, requested
and validated in this menu.
Levy-Jennings plot and Westgard mul-
ti-rules are integrated to facilitate QC
analysis.
Twin QC is designed to relate high and
low controls and get an accurate sta-
tistical picture.
Scheduler is designed to program con-
trols at pre-set dates.
FIGURE 39
FIGURE 40
FIGURE 41