Human HumaStar 600, User Manual

Page: 127 / 132

appendIx
123
10 APPENDIX
10.1 Technical Specification
Throughput
Up to 600 test/hr with 1 shot assays; Typical 450 tests/
hr with 2 shot assays; plus 120 test/hr ISE (optional).
Analysis Modes
End point with sample or reagent blank.
Factor or standard.
Priority selection by sample (profile) or by reagent
(batch).
Calibration curve with any number of standards. Auto-
matic curve fit, multipoint, logit 4/5, etc.
Turbidimetry.
Fast and two-point kinetics (zero and first order).
Routine, batch, STAT procedures, profiles.
Enzymes. Drugs.
Automatic sample dilution on abnormal levels, exces-
sive substrate consumption and/ or lack of linearity. Au-
tomated reflex testing.
Full quality control: Levy-Jennings and Twin plots,
Westgard rules.
Import/export data, methods and historic files.
Automatic backup procedure.
Test selection, automatic calibration, calibration curve
multipoint calibration, polygonal.
Sample blank compensation, calculated tests, Quality
control, auto re-run, record of calibration, data storage
(historic results).
Automatic pre-dilution and post-dilution (ratio 1:2 to
1:100)
Stat: Highest priority in operation.
Continuous sample load.
Decontaminating post wash.
Samples
Sample volume: 2 to 100 µL/test (in increments of
1.0 µL.
Sample Tray: 95 (5 racks x 19 positions) ID bar code
equipped positions for routine, stat and control sam-
ples and standard solutions.
Primary tube (length up to 100 mm), Pediatric vial
TABLE 22