routIne taSKS
75
The results of the day will be displayed including the Westgard rules violation,
the assigned- and cumulative values. CV and SD are calculated if multiple meas-
urements are available.
Press
Detail
to display the single measurements. To exclude a results form
the statistics, select a result in the table on the left side, press
Exclude
and
insert a reason. The point will be removed from the graph and the calulation on
the main screen will be recalculated. The result is not deleted it can be included
again. To get back to the main screen, press
Details
again.
The red color indicates that the results are out of the assigned range or out of
WR (Westgardrules), green they are inside the assigned range. Additionaly, su-
pervisor can define which Westgard Rule will be applicable to this window from
Maintenance > Parameters > Software > OC tab.
5.7 Twin QC
Twin QC operates on quality controls already performed and its purpose is re-
lating high and low controls and getting Youden plots and correlated Levy-Jen-
nings plots.
Youden Plot is a bi-dimensional plot where correlated data for two-level systems
or normal/abnormal data, taken in the same run are represented.
To display Twin QC , open the
Quality Control
Menu and select on the left side
the Submenu
Twin QC
.
FIGURE 75
Summary of Contents for HumaStar 600
